AeroNav GNSS is a highly compact system including all the basic features needed for navigation guidance and measurement of X,Y,Z projection centers and can support also EXIF information for the Camera.
AeroNav GNSS is an entrance level device for mission navigation and camera control based on c/a coded L1 GNSS receivers that support refresh rates of 10 Hz. The use of GPS, Glonass, BeiDou and Galileo makes this Device an extreme robust positioning and navigation system. This enables precise navigation for accurate aerial imaging.
A bi-directional RS232 communication with AeroTopoL FMS supports camera trigger and camera event management:
AeroNav GNSS Technical Specifications
TECHNICAL SPECIFICATION | ||
---|---|---|
Receiver Type | GNSS single-frequency RTK with carrier phase | |
Signals Received | GPS, GLONASS, BeiDou, GALILEO1 and QZSS1 | |
Channels | 162 GPS | |
Sensitivity | -142 dBm | |
SBAS Tracking | 3-channel | parallel tracking |
Update Rate | 10 Hz standard | |
Accuracy | Horizontal (RMS) | Vertical (RMS) |
SBAS (WAAS) | 0.3 m | 0.6 m |
Autonomous* | 1.2 m | 2.5 m *depends on multipath environment, number of satellites in view, satellite geometry, and ionospheric activity |
Timing (1PPS) Accuracy | 20 ns | |
Start-up time | <60 s typical | |
Sat. re-acquisition | <1 s | |
Event marker input | active low | falling edge sync |
Interface | RS232 @155.200 baud | |
Communication | NMEA 0183, RECO and AeroTopoL | |
Total weight | 0.2 kg | |
Dimensions | 200 x 85 mm x 50 mm | |
Power | 9-30 V | 150-350 mA |
Temperature | -10 to 50°C |